• + Expand All
  • - Close All
  • POWER PIPE® HD



    POWER PIPE® HD








    Length of drill pipe, nominal
    180 in
    4.57 m



    Diameter of drill pipe, tool joint end
    3.5 in
    89 mm



    Diameter of drill pipe
    3.06 in
    78 mm



    Bend radius, min
    170 ft
    52 m



    Weight of drill pipe, lined
    184 lb
    84 kg



    Weight of drill pipe & large box (28 pipe)
    6,096 lb
    2765 kg



    Weight of drill pipe & small box (16 pipe)
    3,612 lb
    1638 kg

  • All Terrain
    JT60 AT
    All Terrain

    Industry-exclusive, patented two-pipe drilling system provides more power to the bit than any other rock-drilling system in its class and is the only technology to enable simultaneous drilling and steering through rock and hard soil conditions.

    The inner pipe works as a mechanical motor that drives the bit during the bore; the outer pipe thrusts the bit forward and steers the drill shaft. During backreaming, the outer pipe transmits full machine torque downhole.

    The Ditch Witch All Terrain technology enables rock drilling with very low fluid flow. Less fluid volume means less waste, less cleanup and less environmental impact.

    With its variable rotary drive, the JT60 All Terrain matches exact spindle speed and torque to power through varying ground formations.

  • BATTERY (2 USED)



    BATTERY (2 USED)








    SAE reserve capacity rating
    195 min




    SAE cold crank rating @ 0°F (-18°C)
    950 amps


  • Superior Support
    JT60 All Terrain
    Superior Support

    Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service and expert advice, your Ditch Witch dealer has it all for you.

  • Drilling Fluid System



    Drilling Fluid System








    Pressure, max
    1,300 psi
    90 bar



    Flow, max
    150 gpm
    560 l/min

  • Fluid Capacities



    Fluid Capacities








    Hydraulic reservoir
    36 gal
    136 L



    Fuel tank
    55 gal
    208 L



    Engine lubrication oil, w/filter
    20 qt
    19 L



    Engine cooling system
    31 qt
    29 L



    Antifreeze tank
    16 gal
    60 L

  • VIBRATION LEVEL



    VIBRATION LEVEL








    Average vibration transmitted to the operator’s hand and whole body during normal operation does not exceed 2.5 and 0.5 m/sec2 respectively.





    Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.



  • Productivity
    JT60 All Terrain
    Productivity

    Proven, industry-leading pipe-loading system is simple, easy to use and designed to increase speed with automation, saving you time, money and effort.

    Heavy-duty, planetary-driven anchor system enables you to use full machine thrust when needed, improving jobsite productivity.

    Onboard, enclosed 150-gpm (560-l/min) fluid pump for productive drilling at greater distances. Flow rate can be operated simultaneously with thrust/pullback and rotation.

    Two-speed thrust drive motors provide exceptional low-speed drilling control as well as the ability to reach the high speeds necessary for rapidly loading drill pipes.

    Wireline platform option available.

  • POWER (TIER 4)



    POWER (TIER 4)








    Engine
    Cummins QSB6.7




    Fuel
    Diesel




    Cooling medium
    Liquid




    Injection
    Direct




    Aspiration
    Turbocharged & charge air cooled




    Number of cylinders
    6




    Displacement
    408 in3
    6.7 L



    Bore
    4.21 in
    107 mm



    Stroke
    4.88 in
    124 mm



    Manufacturer’s gross power rating
    200 hp
    149 kW



    Rated speed
    2,200 rpm




    Emissions compliance
    EPA Tier 4i
    EU Stage IIIB

  • POWER PIPE FORGED



    POWER PIPE FORGED








    Length of drill pipe, nominal
    180 in
    4.57 m



    Diameter of drill pipe, tool joint end
    3.25 in
    83 mm



    Diameter of drill pipe
    2.88 in
    73 mm



    Bend radius, min
    169 ft
    52 m



    Weight of drill pipe
    180 lb
    82 kg



    Weight of drill pipe & large box (28 pipe)
    5,984 lb
    2715 kg



    Weight of drill pipe & small box (16 pipe)
    3,548 lb
    1610 kg

  • Dimensions



    Dimensions








    Length
    331 in
    8.41 m



    Width
    87 in
    2.21 m



    Height
    99 in
    2.51 m



    Operating weight
    31,250 lb
    14175 kg



    Entry angle
    10-16°




    Angle of approach
    18°




    Angle of departure
    13°


  • NOISE LEVEL



    NOISE LEVEL








    Operator sound pressure per ISO 6394
    < or = 81 dBA




    Exterior sound power per ISO 6393
    < or = 106 dBA


  • Operation



    Operation








    Spindle speed, max
    240 rpm




    Spindle torque (AT inner spindle), max
    250 rpm




    Spindle torque, max
    9,000 ft·lb
    12200 N·m



    Spindle torque (AT inner spindle), max
    2,000 ft·lb
    2700 N·m



    Carriage thrust travel speed
    100 fpm
    30.5 km/h



    Carriage pullback travel speed
    100 fpm
    30.5 km/h



    Thrust force
    60,000 lb
    267 kN



    Pullback force
    60,000 lb
    267 kN



    Bore diameter
    6.25 in
    159 mm



    Backream diameter
    Variable




    Ground travel speed





    Forward/reverse
    2.5 mph
    4 km/h

  • ALL TERRAIN PIPE



    ALL TERRAIN PIPE








    Length of drill pipe, nominal
    171 in
    4.34 m



    Diameter of drill pipe, tool joint end
    4.13 in
    105 mm



    Diameter of drill pipe
    3.63 in
    92 mm



    Bend radius, min
    205 ft
    62 m



    Weight of drill pipe
    264 lb
    120 kg



    Weight of drill pipe & large box (18 pipe)
    5,580 lb
    2530 kg



    Weight of drill pipe & small box (9 pipe)
    3,150 lb
    1430 kg

  • Operator's Station
    JT60 All Terrain
    Operator's Station

    Open-top vise wrenches are angled toward the operator for an excellent view of the tool joint when making up and breaking out pipes.

    Fully enclosed, climate-controlled cab features instrument panel gauges positioned for visibility, with conveniently placed controls and an excellent view of the tool joint.

    Dual-pivot drill frame allows steep entry angles without raising the tracks off the ground—no need to constantly readjust the machine even when the terrain is muddy or steep; operator station stays level for maximized comfort.

    Operator’s station features an ergonomic seat, color LCD engine display, excellent visibility, and an intuitive joystick that controls all drilling functions.

  • Innovative Design
    JT60 All Terrain
    Innovative Design

    Designed for greater uptime with a simple yet durable, customer-driven design.

    Dual rear independent stabilizers give you the confidence to set up on uneven terrain.

    Wireless operation system provides you remote control of ground drive, stabilizers, dual pivot and stake down functionality allowing for more efficient jobsite setup.

    Easy to service, with all daily maintenance points in one location that are easily accessed through removable doors.

  • POWER (TIER 3)



    POWER (TIER 3)








    Engine
    Cummins® QSB6.7




    Fuel
    Diesel




    Cooling medium
    Liquid




    Injection
    Direct




    Aspiration
    Turbocharged & charge air cooled




    Number of cylinders
    6




    Displacement
    408 in3
    6.7 L



    Bore
    4.21 in
    107 mm



    Stroke
    4.88 in
    124 mm



    Manufacturer’s gross power rating
    190 hp
    142 kW



    Rated speed
    2,200 rpm




    Emissions compliance
    EPA Tier 3
    EU Stage IIIA

  • Power
    JT60 All Terrain
    Power

    60,000 lb (267 kN) thrust and pullback with 9,000 ft·lb (12240 N·m) rotational torque—the powerful combination you need for outstanding productivity on big installation jobs.

    Choice of a 200-gross-hp (149-kW) Tier 4 Cummins® or 190-gross-hp (142-kW) Tier 3 diesel engine.

    Double rack-and-pinion thrust drive is field-proven and engineered to push/pull through long, tough bores.

    Ditch Witch drill pipes are manufactured to be stronger and more durable than the competition. The JT60 All Terrain has drill pipes specially designed to withstand rock drilling forces so you keep your drills and business moving forward.

Documents