• + Expand All
  • - Close All
  • Spoil Door
    • With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.

  • Power Train
    • Tier 3 EngineDeutz TCD914LO6 Tier 3 Diesel
    • Tier 4 EngineVolvo TAD571VE Tier 4f Diesel
    • Tier 3 Rating2300 RPM
    • Tier 4 Rating2200 RPM
    • Tier 3 Maximum Engine Speed373 ft-lbs. (505.7 Nm) @ 2300 RPM
    • Tier 4 Maximum Engine Speed395 ft-lbs. (536 Nm) @ 2200 RPM
    • Tier 3 Engine Torque468 ft-lbs. (634.5 Nm) @ 1600 RPM
    • Tier 4 Engine Torque597 ft-lbs. (809 Nm) @ 1200 RPM
    • Tier 3 Fuel Capacity39 U.S. Gallons (148 L)
    • Tier 4 Fuel Capacity48 U.S. Gallons (182 L)
    • Tier 3 Hydraulic Capacity22 U.S. Gallons (83 L)
    • Tier 4 Hydraulic Capacity22 U.S. Gallons (83 L)
  • Transmission
    • Tier 3 TypeEaton FS-5205A, 5-speed
    • Tier 4 TypeEaton FS-5205A, 6-speed
    • Tier 3 ClutchSpring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator
    • Tier 4 ClutchSpring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator
  • Master Pusher
    • Diameter60 in. (1,524 mm)
    • Working Range24 in. – 60 in. (610 – 1,524 mm) Casing Diameter
    • Hex Drive5 in. (127 mm)
  • Quik Tran
    • Quik Tran is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions.

  • Miscellaneous
    • Work Lights(3) 12 Volt
    • Extension Track(2)
    • Master Saddle(1) 60 in. (1,524 mm) compatible
  • Gearbox
    • Ratio38.8:1
  • Quik Split
    • The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and aids the operator in being able to facilitate better and safer machine positioning.

  • Hydraulic System
    • Maximum Thrust1,200,000 lbs. (544 Tonnes)
    • Hydraulic Thrust Cylinder(4) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm)
  • Dimensions
    • Length Tier 314 ft. 7 in. (4.43 m)
    • Length Tier 414 ft. 10 in. (4.52 m)
    • Width Tier 37 ft. 1 in. (2.16 m)
    • Width Tier 47 ft. 3 in. (2.21 m)
    • Height Tier 37 ft. 5 in. (2.27 m)
    • Height Tier 47 ft. 6 in. (2.29 m)
    • Master Track Length15 ft. (4.57 m) w/1 mm (38 mm) back plate
    • Master Track Width7 ft. 4 in. (2.23 m)
    • Centerline36.02 in. (915 mm)
    • Extension Track Length10 ft. (3 m)
    • Extension Track Width7 ft. 4 in. (2.23 m)
  • Weights
    • Base Unit (Split Weight)8,900 lbs. (4,037 kg)
    • Tier 3 Power Pack (Split Weight)8,600 lbs. (3,901 kg)
    • Tier 4 Power Pack (Split Weight)11,500 lbs. (5,216 kg)
    • Master Pusher2,390 lbs. (1,084 kg)
    • Master Track7,100 lbs. (3,221 kg)
    • Lifting Sling550 lbs. (249 kg)
    • Tier 3 Total Weight27,540 lbs. (12,492 kg)
    • Tier 4 Total Weight30,440 lbs. (13,807 kg)
    • Extension Track5,600 lbs. (2,540 kg) each
    • Master Saddle270 lbs. (123 kg)