36-600
- American Augers
- Auger Boring Machines
Find Your Nearest Location
FEATURES
NEXT GENERATION
Highly Productive Rack & Pinion pulls the machine back to its starting point on the track quickly – no dogging or winching.
- + Expand All
- - Close All
-
Hydraulic System
- Maximum Thrust600,000 lbs. (272 Tonnes)
- Hydraulic Thrust Cylinder(2) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm)
-
Miscellaneous
- Work Lights Tier 3(3) 12 Volt
- Work Lights Tier 4(2) 12 Volt
- Extension Track(2)
- Master Saddle(1) 36 in. (914 mm) compatible
-
Gearbox
- Ratio Tier 354.2:1
- Ratio Tier 4 Final54.2:1
-
Power Train
- Engine Tier 3Deutz D914LO6 Tier 3 Diesel
- Engine Tier 4 FinalCAT C4.4 Tier 4f Diesel
- Rating Tier 3116 HP (86.5 kW)
- Rating Tier 4 Final137 HP (102.2 kW)
- Maximum Engine Speed Tier 32300 RPM
- Maximum Engine Speed Tier 4 Final2300 RPM
- Engine Torque Tier 3228 ft-lbs. (309.1 Nm) @ 2300 RPM
- Engine Torque Tier 4 Final327 ft-lbs. (443 Nm) @ 2200 RPM
- Engine Torque 2 Tier 3276 ft-lbs. (374.2 Nm) @ 1600 RPM
- Engine Torque 2 Tier 4 Final391 ft-lbs. (530 Nm) @ 1400 RPM
- Fuel Capacity Tier 318.5 U.S. Gallons (70 L)
- Fuel Capacity Tier 4 Final22 U.S. Gallons (83.3 L)
- Hydraulic Capacity Tier 322.6 U.S. Gallons (86 L)
- Hydraulic Capacity Tier 4 Final24 U.S. Gallons (91 L)
-
Quik Split
The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and helps the operator facilitate more accurate and safer machine positioning.
-
Quik Tran
Quik Tran is the fast return system, made available exclusively from American Augers. It provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Tran’s benefit will be easier machine operation in challenging work climates or conditions.
-
Master Pusher
- Diameter36 in. (914 mm)
- Working Range12 in. – 42 in. (305 – 1,067 mm) Casing Diameter
- Hex Drive4 in. (102 mm)
-
Weights
- Base Unit (Split Weight)5,100 lbs. (2,313 kg)
- Power Pack (Split Weight) Tier 36,800 lbs. (3,084 kg)
- Power Pack (Split Weight) Tier 4F7,240 lbs. (3,284 kg)
- Master Pusher1,100 lbs. (499 kg)
- Master Track3,500 lbs. (1,587 kg)
- Lifting Sling300 lbs. (136 kg)
- Total Weight Tier 316,800 lbs. (7,620 kg)
- Total Weight Tier 417,240 lbs. (7,820 kg)
- Extension Track2,800 lbs. (1,270 kg) each
- Master Saddle250 lbs. (114 kg)
-
Dimensions
- Length12 ft. 6 in. (3.81 m)
- Width5 ft. 7 in. (1.69 m)
- Height Tier 35 ft. 9 in. (1.75 m)
- Height Tier 4F6 ft. 8 in. (2.03 m)
- Master Track Length13 ft. (3.96 m) w/1 in. (25 mm) back plate
- Master Track Width6 ft. 3 in. (1.92 m) with backplate
- Centerline29.27 in. (744 mm)
- Extension Track Length10 ft. (3 m)
- Extension Track Width5 ft. 3 in. (1.6 m)
-
Transmission
- Type Tier 3Eaton FS-5205A, 5-speed
- Type Tier 4 FinalEaton FS-5205A, 5-speed
- Clutch Tier 3Spring applied with 14. in. (356 mm) diameter single disk / hydraulically-assisted clutch actuator
- Clutch Tier 4 FinalSpring applied with 14. in. (356 mm) diameter single disk / hydraulically-assisted clutch actuator
-
Spoil Door
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.